MAXX Models ME PRO Hop Up Chamber
Complete set of CNC ME PRO aluminum hop-up block offered by MAXX MODEL, with a high manufacturing quality and delivering good performance as well as better fine-tuning hop-up. Ideal for upgrading your AEG type M4 airsoft.
The new ME PRO hop-up block follows the TE version and is ideal for upgrading your airsoft M4 AEG replica. It has a very good manufacturing quality and has a precise hop-up adjustment system. Indeed, it is designed with a notched and numbered wheel, allowing you for example to adjust your trajectory according to the grammage of balls used when you have found your adequate setting.
In addition, this hop-up block is dustproof thanks to side vinyl panels blocking access to the machined holes. There is also a timing system in the axis of the nozzle and the barrel via 3 O-ring seals and 3 springs at the top, bottom and middle of the block for perfect centering.
The ME PRO MAXX MODEL hop-up block has a tilting ball retention system allowing it to be retained when removing the magazine from the replica. This system is automatically unlocked when a new charger is inserted for optimal operation.
Features:
The Hop Up was designed with BB Latching System to avoid dropping the BB after removing the magazine.
The locking system can also be opened manually to manually release the BBs.
Use a air nozzle with a length from 21.00 to 21.25 mm.
Set complet bloc hop-up en aluminium CNC ME PRO proposé par MAXX MODEL, disposant d'une grande qualité de fabrication et délivrant de bonnes performances ainsi qu'une meilleure finesse de réglage hop-up. Idéal pour l'upgrade de votre airsoft AEG type M4.
FONCTIONALITÉ:
Le Hop Up a été conçu avec le système de verrouillage BB pour éviter de laisser tomber le BB après avoir retiré le chargeur. Le système de verrouillage peut également être ouvert manuellement pour libérer manuellement les BB. Utilisez un air nozzle d'une longueur de 21,00 à 21,25 mm.
TECHNICAL SHEET / FICHE TECHNIQUE
Version | PRO |
Material/Matériaux | Aluminium 6061 |
Longueur | 51mm |
Compatibility / Compatible | Marui M4 / M16 series (including/incluant KRYTAC, excluding/exluant KWA). |
Hauteur | 37.75mm |
Diameter/Diamètre |
11mm (Min.) - 11.5mm (Max.) |
Outer Barrel Hub Diameter/Diamètre Hub Outer Barrel |
12mm (Min.) |
Outer Barrel Hub DiameterDiamètre Hub Nozzle | 8.3mm (Max.) |
Diameter Feeder/Diamètre Feeder |
9.25mm (Min.) |
Feeder length/Longueur Feeder |
6.25mm (Max.) |
contenu de l’emballage |
1 x Bloc Hop-up Aluminium CNC ME PRO Maxx Model 2 x Panneaux vinyles latéraux 1 x Standard-Hop Arm Aluminium CNC 1 x R-Hop Arm Aluminium CNC 1 x Joint silicone Standard-Hop Nub Damper 1 x Joint silicone R-Hop Nub Damper 1 x R-Hob Nub 4.5mm Aluminium CNC 1 x R-Hob Nub 6mm Aluminium CNC 1 x Goupille en laiton CNC 1 x Locking C-Clip en Delrin CNC 1 x Barrel Spacer laiton CNC 3 x Ressort de compression central en acier |
package includes |
1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit 2 x Strong Clear Vinyl Cover 1 x CNC Aluminum Standard-Hop Arm 1 x CNC Aluminum R-Hop Arm 1 x Standard Rubber-Hop Nub Damper 1 x Silicone Rubber R-Hop Nub Damper 1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub 1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub 1 x CNC Brass Threaded Slot Pin 1 x CNC Delrin Locking C-Clip 1 x CNC Barrel Brass Spacer 1 x Brass Spacer Holder Oring 3 x Steel Compression Spring |